series am 1mr -z 1 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r9 .e 1 of 3 north america only features: ? regulated single output ? 1000vdc isolation ? continuous short circuit protection ? operating temperature: - 40c to +85c ? rohs compliant ? industry standard pinout ? mtbf> 1,5 00,000 hours ? 14 pin dip package models single output model input vol tage (v) output voltage (v) output current max (ma) isolation (vdc) max capacitive load (uf) efficiency (%) am1mr - 0503sz 4.5 - 5.5 3.3 303 1000 220 55 am1mr - 0505sz 4.5 - 5.5 5 200 1000 220 64 am1mr - 0507sz 4.5 - 5.5 7.2 139 1000 220 64 am1mr - 0509sz 4.5 - 5.5 9 111 1000 220 65 am1mr - 0512sz 4.5 - 5.5 12 83 1000 220 66 am1mr - 0515sz 4.5 - 5.5 15 67 1000 220 66 am1mr - 1203sz 10.8 - 13.2 3.3 303 1000 220 56 am1mr - 1205sz 10.8 - 13.2 5 200 1000 220 64 am1mr - 1207sz 10.8 - 13.2 7.2 139 1000 220 65 am1mr - 1209sz 10.8 - 13.2 9 11 1 1000 220 66 am1mr - 1212sz 10.8 - 13.2 12 83 1000 220 66 am1mr - 1215sz 10.8 - 13.2 15 67 1000 220 68 am1mr - 2403sz 21.6 - 26.4 3.3 303 1000 220 56 am1mr - 2405sz 21.6 - 26.4 5 200 1000 220 63 am1mr - 2407sz 21.6 - 26.4 7.2 139 1000 220 65 am1mr - 2409sz 21.6 - 26.4 9 111 1000 220 66 am1mr - 2412sz 21.6 - 26.4 12 83 1000 220 67 am1mr - 2415sz 21.6 - 26.4 15 67 1000 220 67 note: all specifications in this datasheet are measured at an ambient temperature of 25c, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. input specifications parameters nominal typical maximum units voltage range 5 12 24 4.5 - 5.5 10.8 - 13.2 21.6 - 26.4 vdc filter capacitor absolute maximum rating (100 ms) 5 12 24 7 15 28 vdc input no load c urrent 35 ma input r eflected c urrent 20 ma isolation specifications parameters conditions typical rated units tested i/o voltage 3 sec 1000 vdc resistance at 500vdc >1000 mohm capacitance 60 pf output specifications parameters conditions typical maximum units voltage accuracy 2 % short circuit pr otection continuous short circuit restart auto - recovery line voltage regulation ll ~ hl 0.5 % of vin
series am 1mr -z 1 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r9 .e 2 of 3 north america only output specifications (continued) parameters conditions typical maximum units load voltage regulati on from 0% to 100% load 0.5 % load voltage regulation (3.3v output) from 0% to 100% load 1 % temperature coefficient 0.02 %/ o c ripple & noise 20mhz bandwidth 50 mv p - p general specifications parameters conditions typical maximum units switchi ng frequency 50 (variable) khz operating temperature full load - 40 to +85 o c storage temperature - 40 to +125 o c maximum case temperature 100 o c cooling free air convection humidity 95 % rh case material non - conductive plastic (ul94v - 0) weight 2.7 g dimensions (l x w x h) 20.3 0 x 10.16 x 6. 90 m m ( 0.80 x 0.40 x 0.27 inches ) mtbf > 1,500, 000hrs dual (mil - hdbk - 217f, ground benign, t=+25 o c) (too big, may be 1.5m?) maximum soldering temperature 1.5mm from case for 10 sec 260 o c safet y specifications parameters agency approvals ce safety standards en 55022, class b iec61000 - 4 -2 iec61000 - 4 -3 iec61000 - 4 -4 iec61000 - 4 -6 iec61000 - 4 -8 also designed to meet iec 60950 - 1 pin out specifications dimensions pin single 1 - v input 7 nc 8 no pin 9 + v output 10 no pin 11 - v output 14 + v input nc: no connection 15 . 24 ( 0 . 60) 1 0 . 1 6 ( 0 . 4 0 ) printed face 6 . 9 0 ( 0 . 2 7 ) 3 . 0 5 ( 0 . 1 2 ) 0 . 50 ( 0 . 02 ) 7 . 6 2 ( 0 . 3 0 ) 20. 30 ( 0 . 80 ) 7 8 14 1 bottom view 9 10 11 2 . 54 ( 0 . 10) 0 . 2 5 ( 0 . 0 1 )
series am 1mr -z 1 watt | dc - dc converter www.aimtec.com tel: + 1 514 620 2722 toll free: + 1 888 9 aimtec (924 6832) f 051e r9 .e 3 of 3 north america only radiated and conducted emissions application circuit: c1 l1 47 0f/100v 12 h note: 1. datasheets a re updated as needed and as such, specifications are subject to change without notice. once printed or downloaded, datasheets are no longer controlled by aimtec; refer to www.aimtec.com for the most current product specifications. 2. product labels shown , including safety agency certifications on labels, may vary based on the date manufactured. 3. mechanical drawings and specifications are for reference only. 4. all specifications are measured at an ambient temperature of 25c, humidity<75%, nominal inp ut voltage and at rated output load unless otherwise specifie d. 5. aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. cas numbers and other limited info rmation are considered proprietary and may not be available for release. 6. this product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control s ystems or other such applications which necessita te specific safety and regulatory standards other the ones listed in this datasheet. 7. warranty is in accordance with aimtecs standard terms of sale available at www.aimtec.com.
|
